Accessories for XRF Sample Preparation & Analysis

(1) 25 Tons Manual Lab Press (Table-top) 
(2) 30 Tons Manual Lab Press (Column type) 
(3) 40 Tons Manual Lab Press (Column type) 
(4) 40 mm Die Set (for obtaining round plaques) 
(5) 40 mm Die Set (for pressing samples in Aluminium Cups) 
(6) 40 mm Die Set (for pressing samples in Re-usable Steel Rings) 
(7) Re-usable Steel Rings

(1) 25 Tons Manual Lab. Press (Table-top)

Features 

* Table-top Model
* Compact & sturdy design
* Side Plate Construction integral with hydraulic 
   cylinder 
* Pump is kept on one side for easy operation
* Press mounted on a broad base for stability 
* Calibrated pressure gauge & high pressure seals 
* Safety mechanisms to prevent excessive ram 
   stroke & excessive pressure. 

Technical Data 

Max. Capacity : 25 Tons 
Max. Ram Stroke : 50 mm
Max. Working Pressure : 260 Kg/sq.cm. 
Usable Platen Size : 110 mm dia. 
Overall Dimensions : 340 L X 520 D X 630 H (mm).
Overall Weight : 90 Kgs. 

Notes
1)  25 Tons Manual Lab. Press (Column Type) is also available.
2)  For 25 Tons Semi-Automatic Lab. Press, please refer to 
     Motorized Presses Section. 


(2) 30 Tons Manual Lab. Press (Column type)


Features


* 2-column model with stand
* Heavy duty construction
* Double-action pump for ease of operation
* Safety mechanism to prevent excessive ram 
   stroke
* Pressure relief valve to safeguard 
   against applying excessive pressure 
* Epoxy-coated surface finish
* Calibrated pressure gauge & high pressure seals

Technical Data 

Max. Capacity : 30 Tons 
Max. Ram Stroke : 50 mm
Max. Working Pressure : 170 Kg/sq.cm.
Usable Platen Size : 150 X 150 mm 
Overall Dimensions : 650 L X 650 D X 1150 H (mm).
Overall Weight : 150 Kgs. 

Notes
1) 30 Tons Manual Lab. Press (Table Top) is also available. 
2) For 30 Tons Semi-Automatic Press, please refer to Motorized Presses Section. 

(3) 40 Tons Manual Lab. Press (Column type)


Features


* 4-column model with stand 
* Robust construction with hardened pistons & valves
* Double-displacement pump 
* Single-acting, self-returning cylinder 
* Suitable cylinder diameter to facilitate easy pumping 
* High pressure tubing & seals
* In-built safety features ensure smooth operations



Technical Data 

Max. Capacity : 40 Tons 
Max. Ram Stroke : 50 mm
Max. Working Pressure : 160 Kg/sq.cm.
Usable Platen Size : 150 X 150 mm 
Overall Dimensions : 670 L X 670 D X 1200 H (mm).
Overall Weight : 250 Kgs. 

Notes
1) 40 Tons Manual Lab. Press (Table Top) is also available.
2) For 40 Tons Automatic Press, please refer to Motorised Presses Section. 

(4) 40 mm Die Set (for obtaining round plaques) 

This Die Set is used to form 40 mm dia. circular discs ( round plaques ). 
It consists of outer stainless steel die, two punches with mirror-finished surface, long pusher rod & transparent disc removal ring. 

The Die can be subjected to a Max. Load of 40 Tons.

(5) 40 mm Die Set (for pressing samples in Aluminium Cups) 

This Die Set is used for pressing powder samples in 40 mm dia. Aluminium Cups. It consists of cylindrical punch, adapter, bottom plate & sample removal ring. All die parts are made of hardened & ground stainless steel.  Cylindrical Punch has a smooth mirror-finished surface to obtain excellent sample quality.

The Die can be subjected to a Max. Load of 40 Tons.

40mm Die Set (For Pressing Samples in Aluminium Cups)


(6) 40 mm Die Set (for pressing samples in Re-usable Steel Rings)

This Die Set was developed to overcome the limitations of using Aluminium cups. The problems of high long-run cost of Aluminium cups , disposal of cups & wastage of valuable sample powder pressed in the cups can be easily solved by using this die set. 

The Die Set is used for pressing powder samples in 40 mm re-usable stainless steel rings. It consist of cylindrical punch, sleeve, springs, adapter, bottom plate & ring removal punch. The die set is made of hardened stainless steel and die parts have a close tolerance. 

The Die can be subjected to a Max. Load of 40 Tons.



40mm Die Set (For Pressing Samples in Re-usable Steel Rings)

Note 
All the above Die Sets are used for pressing powder samples of cement, clinker, clay, limestone, glass & other metallic powders for X-Ray analysis.  Dies of non standard size can also be manufactured, on request.

(7) Re-usable Steel Rings 

These rings are made from Special Steel & are manufactured by a specially - developed process. These rings can stand high pressure (they do not crack or bulge under pressure). Once X-Ray analysis of each sample is done, the sample pressed in the steel ring can be removed & the same ring can be used for further sample preparation.  Also, the pressed powder sample can be reprocessed & used for some other purpose.

 

                                                  Designed & Hosted by : MID   Promoted by : GID