|
Accessories for Polymer Film
Making
(1) Heating type Manual Lab. Press (Table top & Column type)
(2) Heating & Cooling type Manual Lab. Press (Table top & column type)
(3) Round & square shaped Dies for
polymer film making
(1)
Heating type Manual Lab. Press (Table top & Column
type)
|
|
|
Heating type
Manual Lab. Press (15 Tons, Table-Top Press)
|
Features :-
* Table-top model & column type model
* Heating by Hot Platen with electric heaters
* Thermocouple with compensating cable for pressure sensing
* Temperature Controller for controlling Platen temperature
* High Quality insulation sheets for heat insulation
* Made to order Control Panel
Technical Data
| |
Table-Top
Press |
Column
type Press |
|
Max. Capacity
|
15 Tons
|
20
Tons
|
|
Max. Ram Stroke
|
15
mm |
25
mm |
| Max.
Working Pressure
|
190
Kg/sq.cm. |
210
Kg/sq.cm. |
|
Top Platen
|
Fixed |
Adjustable |
|
Bottom Platen
|
Adjustable |
Adjustable |
|
Daylight between Platens
|
50
mm |
100
mm |
|
Platen Sizes
|
100
X 90 mm |
150
X 150 mm |
|
Platen Temperature
|
0-300
deg. C |
0-300
deg. C |
|
Overall Dimensions (mm)
|
600
(L) X 270 (D) X 460 (H) |
700
(L) X 270 (D) X 710 (H) |
(2) Heating & Cooling type Manual Lab. Press (Table top & column type)
|
|
|
Heating &
Cooling Type Manual Lab. Press
( 20 Tons, Column Type Press ) |
Features
* Compact Table-top model & sturdy column type model
* Heating by electric heaters & Cooling by chilled water
* Unique design of heating & cooling platens for positioning of heaters &
for chilled water circulation.
* Pressure sensing by Cr-Al Thermocouple
* Temperature Controller for controlling Platen temperature
* High Quality Insulation Sheets for Heat Insulation.
* Stand-alone Control Panel for housing system controls
|
Technical Data
| |
Table-Top
Press |
Column
type Press |
|
Max. Capacity
|
15
Tons |
20
Tons
|
|
Max. Ram Stroke
|
15
mm |
25
mm |
| Max.
Working Pressure
|
190
Kg/sq.cm. |
210
Kg/sq.cm. |
|
Top Platen
|
Fixed |
Adjustable |
|
Bottom Platen
|
Adjustable |
Adjustable |
|
Daylight between Platens
|
50
mm |
100
mm |
|
Platen Sizes
|
100
X 90 mm |
250
X 250 mm |
|
Platen Temperature
|
0-300
deg. C |
0-300
deg. C |
|
Overall Dimensions
|
600
(L) X 270 (D) X 510 (H) |
850
(L) X 270 (D) X 760 (H) |
Note
:
Motorised
(Semi-Automatic) Presses for Polymer Film Making can also be
manufactured on request.
(3) Round & square shaped Dies for Polymer Film Making.
Round & square shaped dies are manufactured by us for moulding of polymers such as HDPE, LDPE, PP into thin films, sheets and round pellets. In case where a range of films/sheets having different thicknesses are to be obtained using the same die, we provide adequate spacers to achieve the end result.
Samples are prepared by applying pressure & heat simultaneously. |
