|
Motorized
Lab. Pellet Presses
A) Standard Presses with Electrical Controls
(1) 15 Tons Semi-Automatic Press (Table Top) - Used in IR/FTIR
analysis.
(2) 25 Tons Semi-Automatic Press (Table Top) - Used in XRF
analysis.
(3) 30 Tons Semi-Automatic Press (Table Top) - Used in XRF
analysis.
(4) 40 Tons Semi-Automatic Press (Table Top) - Used in XRF
analysis.
B) Special Presses
with PLC Controls
(1) 15 Tons Semi-Automatic Press (Column Type) - Used in IR/FTIR
& other
applications involving solid sampling.
(2) 40 Tons Automatic Press (Similar to Herzog Press) -
Used in XRF analysis.
A) Standard Presses with Electrical Controls
(1) 15 Tons Semi-Automatic Press (Table Top) - Used in IR/FTIR
analysis.
Features :
* Compact press design
* Easy to operate electrical controls
* Auto/Manual Mode Selection
* Pressing & Ejection Cycle
* Low displacement pump & motor combination develops
slow & steady
pressure (without any jerks)
* Controlled slow release of pressure
* Better pellet quality
* Desired Pressure is set on pressure switch & actual pressure indicated
by pressure gauge (Glycerine filled)
* Settable parameters :- pressure, hold time & ram retracting time.
* Relief valve to avoid excessive pressure & oil bypass mechanism to
avoid excessive ram stroke
* Transparent Polycarbonate safety guard has been provided in the area of operation.
* Emergency Stop Button to cut-off electrical supply (if required)
* Reputed MCB, overload relay & relay contactors are included
in the
Control-Panel for electrical safety
* Press is enclosed in a powder coated metallic cover, which is
easily removable for maintenance purpose.
|
Technical Data
Max. Capacity : 15 Tons
Max. Ram Stroke : 50 mm
Max.
Working Pressure : 190 Kg/sq.cm.
Daylight between platens : 150 mm
Platen Size : 110 mm dia.
Overall dimensions : 400 L X 470 D X 560 H mm.
Electric Supply : 230 V AC Mains
(2) 25 Tons Semi-Automatic Press (Table Top) - Used in XRF
analysis.
Features :
Similar to (1)
above
Technical Data
Max. Capacity : 25 Tons
Max. Ram Stroke : 50 mm
Max.
Working Pressure : 260 Kg/sq.cm.
Daylight between platens : 150 mm
Usable Platen Size : 110 mm dia.
Overall dimensions : 400 L X 470 D X 610 H mm
Electric Supply : 230 V AC Mains
(3) 30 Tons Semi- Automatic Press (Table Top) - Used in XRF
analysis.
Features : Similar to (1) above
Technical Data
Max. Capacity : 30 Tons
Max. Ram Stroke : 50 mm
Max.
Working Pressure : 195 Kg/sq.cm.
Daylight between platens : 150 mm
Usable
Platen Size : 110 mm dia.
Overall dimensions : 440 L X 510 D X 650 H mm
Electric Supply : 230 V AC Mains
|
|
(4) 40 Tons Semi- Automatic Press (Table Top) - Used in
XRF analysis.
Features
:
Similar to (1) above
Technical Data
Max. Capacity : 40 Tons
Max. Ram Stroke : 50 mm
Max.
Working Pressure : 200 Kg/sq.cm.
Daylight between platens : 150 mm
Usable
Platen Size : 110 mm dia.
Overall dimensions : 460 L X 510 D X 650 H mm
Electric Supply : 230 V AC Mains
Note :
If required, the above
4 Models can also be made available with Pressure
Transducer
(for pressure sensing) & Pressure Controller (for
digital pressure read-out)
instead of Alen Key Type Pressure Switch &
Mechanical Pressure Gauge.
|
B)
Special Presses with PLC Controls
(1) 15 Tons Semi-Automatic Press (Column Type) - Used in IR/FTIR & other
applications involving solid
sampling.
Features
* 2-column press unit
& compact control unit
* Ease of operation
* Auto/Manual selector switch
* Press functioning by Programmable Logic Controls
* PLC Unit consists of CPU, Analog Input & Display
Unit
* Settable parameters :- clamp pressure & hold time
* Pressure sensing by Pressure Transducer &
indicated on Display Unit
as well as on pressure gauge
* Manual Gate with safety switch
* Two anti-tie-down push buttons for operator safety.
* Sensor to sense ram home position.
Technical Data
Max. Capacity : 15 Tons
Max. Ram Stroke : 150 mm
Max. Working Pressure : 190 Kg/sq.cm.
Daylight between platens : 150 mm
Usable Platen Size : 150 X 150 mm.
Overall dimensions : Press Unit - 300 L X 650 D X 770 H
mm
Control Unit - 500 L X 250 W X 600 H mm
Electric Supply : 230 V AC Mains
(2) 40 Tons Automatic Press (Similar to Herzog
Press) - Used in XRF analysis.
Features
* Heavy-duty box-type design
* Double-acting, up stroking press to mould samples
in Aluminium cups or
re-usable stainless
steel rings
* PLC driven cycle - Pressing & Ejection
* PLC Unit consists of CPU, Analog Input & Display
Unit
* Auto / Manual Mode Selection
* Programmable parameters :- forward pressure, hold time, ram retracting time
&
ejection pressure.
* Pressure sensing by Pressure Transducer & indicated on Display Unit &
on
pressure gauge
* Glycerine filled pressure gauge
* Proximity switch to sense closed position of press
arm
* Reputed MCB, overload relay & relay contactors are included in the
Control Panel for
electrical safety
Technical Data
Max. Capacity : 40 Tons
Max. Ram Stroke : 150 mm
Max. Working Pressure : 300 Kg/sq.cm.
Desired size of sample : 40 mm dia.
Overall dimensions : 750 L X 900 D X 1200 H mm
Electric Supply : 440 V AC Mains (3 Phase)
|
|
