Accessories for Polymer Film / Pellet Making
(1) Heating type Manual Lab. Press (Table top & Column
type)
(2) Heating & Cooling type Manual Lab. Press (Table
top & column type)
(3) Round & square shaped Dies for polymer film
making
1)
Heating type Manual Lab Press 15 Tons (Table top &
Column Type)
 |
Features :-
* Table-top model & column type
model
* Heating by electric heaters
* Thermocouple for temperature sensing
* PID Temperature Controller for controlling
Platen temperature
* Imported insulation sheets for heat insulation
* Made to order Control Panel
|
Technical Data
|
|
Table-Top
Press |
Column
type Press |
|
Max. Capacity |
15 Tons |
20 Tons |
|
Max. Ram Stroke |
15 mm |
25 mm |
|
Max. Working Pressure |
190 Kg/sq.cm. |
210 Kg/sq.cm. |
|
Top Platen |
Fixed |
Adjustable |
|
Bottom Platen |
Adjustable |
Adjustable |
|
Daylight between Platens |
50 mm |
100 mm |
|
Platen Sizes |
100 X 90 mm |
150 X 150 mm |
|
Platen Temperature |
0-300 deg. C |
0-300 deg. C |
|
Overall Dimensions (mm) |
550 (L) X 270 (D) X 410 (H) |
700 (L) X 270 (D) X 710 (H) |
2) Heating & Cooling type Manual Lab Press
20 Tons (Table Top & Column Type)
|
* Compact Table-top model & sturdy column type
model
* Heating by electric heaters & Cooling by
chilled water
* Unique design of heating & cooling platens for
positioning of heaters & for chilled water
circulation.
* Temperature sensing by Thermocouple
* PID Temperature Controller for controlling
Platen temperature
* High Quality Insulation Sheets for Heat
Insulation.
* Stand-alone Control Panel for housing system
controls |
Technical
Data
| |
Table Top
Press |
Column Type
Press |
|
Max. Capacity |
15 Tons |
20 Tons |
|
Max. Ram Stroke |
15 mm |
25 mm |
|
Max. Working Pressure |
190 Kg/sq.cm. |
210 Kg/sq.cm. |
|
Top Platen |
Fixed |
Adjustable |
|
Bottom Platen |
Adjustable |
Adjustable |
|
Daylight between Platens |
50 mm |
100 mm |
|
Platen Sizes |
100 X 90 mm |
150 X 150 mm |
|
Platen Temperature |
0-300 deg. C |
0-300 deg. C |
|
Overall Dimensions |
550 (L) X 270 (D) X 510 (H) |
850 (L) X 270 (D) X 760 (H) |
3)
Round & Square Shaped Dies for Polymer Film Making
Round & square shaped dies are manufactured by us for
moulding of polymers such as HDPE, LDPE, PP into thin
films, sheets and round pellets. In case where a range
of films/sheets having different thicknesses are to be
obtained using the same die, we provide adequate spacers
to achieve the end result. Samples are prepared by
applying pressure & heat simultaneously.
|
