Hardened Alloy Steel Dies For Powder Compaction
We regularly manufacture dies made
from Hardened Alloy Steel for all Powder Compaction
Applications. These Dies are used to form circular pellets for
IR/ FTIR / XRF Solid Sampling.
Hardened Alloy Steel Dies are
preferred for all applications where use of tungsten carbide is
not essential. Tungsten Carbide is not only a costly material
but is also brittle in nature. Parts made from tungsten carbide
have to be handled with extreme care.
Dies made from Hardened Alloy
Steel achieve a high hardness & hence take high pressure. Also, this material is corrosion resistant.
Each die consists of two piece outer die body, punches (anvils),
pusher rod & pellet removal ring. Die is fitted with a vacuum
nozzle for evacuation (if requires). Both punches (anvils) have
one face mirror finished, which ensures excellent surface finish
of pellets.
Die can be easily dismantled for
cleaning purposes. The entire set is enclosed in a velvetted
teakwood box for safety & durability.
Dies are available in the sizes 6mm, 8mm, 10 mm,
13 mm, 15 mm, 20 mm, 25 mm, 40mm.
The maximum load which each die can bear varies with reference
to the internal diameter of each die.
Notes :
Each part is separately available
for replacement.
Spare punches, pushers are sold in pairs only.
|
