Accessories for XRF Sample Preparation & Analysis

(1) 25 Tons Manual Lab Press (Table-top) 
(2) 30 Tons Manual Lab Press (Table-top) 
(3) 40 Tons Manual Lab Press (Table-top) 
(4) 40 mm Die Set (for obtaining round pellets) 
(5) 40 mm Die Set (for pressing samples in Aluminium Cups) 
(6) 40 mm Die Set (for pressing samples in Re-usable Steel Rings) 
(7) Aluminium Cups
(8) Reusable Steel Rings
(9) Vibratory Cup Mill (Lab. Scale Grinding Machine)

1) 25 Tons Manual Lab Press (Table-Top)

Features * Table-top Model * Compact & sturdy design * Side Plate Construction integral with hydraulic cylinder * Pump is kept on one side for easy operation * Press mounted on a broad base for stability * Calibrated pressure gauge & high pressure seals * Safety mechanisms to prevent excessive ram stroke & excessive pressure. Technical Data Max. Capacity : 25 Tons Max. Ram Stroke : 50 mm Max. Daylight : 120mm Max. Working Pressure : 260 Kg/sq.cm. Usable Platen Size : 110 mm dia. Overall Dimensions : 350 L X 530 D X 630 H (mm). Overall Weight : 90 Kgs. Notes For 25 Tons Semi-Automatic Lab. Press, please refer to Motorized Presses Section. Column Type Presses can also be manufactured on request .

Features - Similar to Item 1above

Technical Data
Max. Capacity : 30 Tons
Max. Ram Stroke : 45 mm.
Max. Daylight : 120 mm
Max. Working Pressure : 195 Kg/sq.cm.
Usable Platen Size : 110 mm dia.
Overall Dimensions : 510 L X 440 D X 730 H (mm).
Overall Weight : 125 Kgs


Notes
For 30 Tons Semi-Automatic Lab. Press, please refer to Motorized Presses Section.
Column Type Presses can also be manufactured on request .

(3) 40 Tons Manual Lab Press (Table Top)

Features - Similar to Item 1above

Technical Data
Max. Capacity : 40 Tons
Max. Ram Stroke : 45 mm
Max. Daylight : 120 mm
Max. Working Pressure : 200 Kg/sq.cm.
Usable Platen Size : 110 mm dia.
Overall Dimensions : 510 L X 460 D X 750 H (mm).
Overall Weight : 150 Kgs.

Notes
For 40 Tons Semi-Automatic Lab. Press, please refer to Motorized Presses Section.
Column Type Presses can also be manufactured on request .

(4) 40 mm Die Set (for obtaining round pellets) 

This Die Set is used to form 40 mm dia. circular discs ( round pellets ). 
It consists of outer stainless steel die, two punches with mirror-finished surface, long pusher rod & transparent disc removal ring. 

The Die can be subjected to a Max. Load of 40 Tons

(5) 40 mm Die Set (for pressing samples in Aluminium Cups) 

This Die Set is used for pressing powder samples in 40 mm dia. Aluminium Cups. It consists of cylindrical punch, adapter, bottom plate & sample removal ring. All die parts are made of hardened & ground stainless steel. Cylindrical Punch has a smooth mirror-finished surface to obtain excellent sample quality.

The Die can be subjected to a Max. Load of 40 Tons.

(6) 40 mm Die Set (for pressing samples in Reusable Steel Rings)

This Die Set was developed to overcome the limitations of using Aluminium cups. The problems of high long-run cost of Aluminium cups , disposal of cups & wastage of valuable sample powder pressed in the cups can be easily solved by using this die set.

The Die Set is used for pressing powder samples in 40 mm re-usable steel rings. It consist of cylindrical punch, sleeve, springs, adapter, bottom plate & ring removal punch. The die set is made of hardened stainless steel and die parts have a close tolerance.
The Die can be subjected to a Max. Load of 40 Tons.

 
Note
All the above Die Sets are used for pressing powder samples of cement, clinker, clay, limestone, glass & other metallic powders for X-Ray analysis. Dies of non standard size can also be manufactured, on request.

(7) Aluminium Cups

We regularly supply good quality Aluminium Cups of size 40 x 35 x 9 mm thickness

(8) Reusable Steel Rings

We manufacture Reusable Steel Rings of size 40 x 35 x 14 mm thickness. These rings are made from Special Steel & are manufactured by a specially - developed process. These rings can stand high pressure (they do not crack or bulge under pressure). Once X-Ray analysis of each sample is done, the sample pressed in the steel ring can be removed & the same ring can be used for further sample preparation. Also, the pressed powder sample can be reprocessed & used for some other purpose.
 

(9) Vibratory Cup Mill (Lab. Scale Grinding Machine)

We also supply Vibratory Cup Mill through our business associates, M/s Alpromec Enterprises, Thane. It is a Lab. Scale Grinding Machine for making Fine Powders. Features :-   Fast & pure grinding without loss of material Dry & wet grinding possible Ideal for cement, chemical, metals, mining industry etc. for XRF Analysis. Option of grinding sets available. Grinding time controlled by digital timer. No Dust & Noise.

| Accessories for IR / FTIR Spectroscopy Analysis | Accessories for XRF Sample Preparation & Analysis | Motorized Lab Pallet Presses for IR / FTIR / XRF Sampling |
| Accessories for Polymer Film / Pellet Making | Hardened Alloy Steel Dies For Powder Compaction | Tungsten Carbide Dies for Powder Compaction |
| Lab Presses & Toolings for Cosmetic Powder Pressing | Made-to-order Laboratory Equipment |